用途
藉由氣壓操作轉換成高壓液體輸出的一種設備，液體輸出端安裝噴嘴達到噴霧效果的清洗功能。
|
規格 | |||
|---|---|---|---|
|
控制用空壓壓力 |
4 bar |
||
|
最大空壓驅動壓力 |
6 bar |
||
|
來回一次吸水量 |
12 cm3/stroke |
||
|
液壓出口壓力 |
25 ~ 150 bar | ||
|
重量 |
17 kg | ||
|
輸出 |
純水，異丙醇 DI water, IPA | ||
|
產品特色 |
1. 輸出壓力透過調節驅動氣壓來控制，驅動壓力範圍為 0.5 至 6 bar。 Output pressure regulated by adjusting the pneumatic driving pressure. Operating range: 0.5 to 6 bar. 2. 噴嘴直徑大小會影響設備的運作頻率。 The operating frequency is determined by the nozzle diameter. 3.操作介面設計簡潔，僅需空壓驅動，無需外接電源。 Simple operation with pneumatic-only drive system - no electrical power required. |
||
|
備註 |
系統包含兩組獨立壓力：控制用空壓力負責維持往復動作；驅動壓力則專責調節輸出壓力。 The system consists of two independent pressures: control air pressure maintains reciprocating motion, while driving pressure regulates output pressure. |
||